Crane & Hoist Spare Parts New, Obsolete & Reconditioned
Looking for a crane part that is expensive, obsolete, difficult to identify or simply taking too long to source? AC Crane Maintenance supplies and sources crane and hoist spare parts for major international and South African brands, with new, alternative-source, selected pre-used, reconditioned, repair and service-exchange options available depending on the component and application.
Obsolete Does Not Automatically Mean Replace the Hoist
Older cranes can remain productive for many years when the correct replacement components can still be sourced, repaired, reconditioned or manufactured. Before replacing a complete hoist because one component has failed, let us investigate the part first.
More Than One Sourcing Route
The correct solution depends on the component, equipment condition, availability and safety requirements. We investigate the most practical route instead of automatically assuming that a complete assembly must be replaced.
- New replacement components
- Alternative-source components
- Older and obsolete parts
- Selected pre-used components
- Reconditioned components
- Service-exchange units
- Component repair
- Custom manufactured replacements
New, Used, Reconditioned or Repaired
Not every breakdown requires the same solution. We look at the actual component, equipment condition, urgency and availability before recommending the most practical replacement or repair route.
New Replacement Parts
New crane and hoist components sourced through local and international supply channels for current and older equipment, subject to correct identification and availability.
Obsolete & Hard-to-Find Parts
Specialist sourcing for older crane and hoist components that may be discontinued, difficult to obtain or no longer readily available through normal supply channels.
Selected Pre-Used & Reconditioned Parts
Where suitable, selected pre-used or reconditioned components can provide a practical option for older equipment. Condition and suitability are assessed for the intended application.
Repair & Service Exchange
Repair and service-exchange options for suitable motors, stators and other repairable assemblies where an exchange or repair is more practical than complete replacement.
Parts for Major Crane & Hoist Brands
We are not limited to one crane manufacturer. Send us the equipment details and we can investigate replacement parts, repair options, compatible alternatives or engineered solutions for a wide range of crane and hoist systems.
Older Demag Parts
Older Demag cranes and hoists remain in service throughout industry. Where a normal replacement component is difficult to obtain, we can investigate specialist sourcing, selected pre-used parts, repair, reconditioning or an alternative replacement solution.
Send us the hoist type, serial information, component number where available, nameplate photographs and clear photos of the failed part.
Not Limited to the Brands Listed
Kone, Demag, SWF, Verlinde, ABUS, Morris, Tusker, Condra, Donati, Güralp and Elephant are examples of equipment we may be asked to support - they are not the limit of our sourcing capability.
If the make is not listed, send us the details anyway. If the component can be correctly identified, sourced, repaired or practically reproduced, we will investigate the available options.
What Spare Part Are You Looking For?
From small wear components to complete mechanical and electrical assemblies, send us the part details even if you do not see the exact component listed below.
Brake Linings & Brake Parts
Brake linings, friction discs, pads, coils, rectifiers, hubs, springs and complete brake assemblies.
Rope Guides
Replacement rope guides and associated rope-guiding components for industrial wire rope hoists.
Couplings & Inserts
Motor couplings, drive couplings, coupling hubs, flexible inserts, spiders and associated drive components.
Input Shafts & Drive Shafts
Gearbox input shafts, output shafts, drive shafts, keyed shafts, pins and associated mechanical drive parts.
Gearbox Assemblies
Complete hoist and travel gearbox assemblies, gearbox components, gears, bearings, shafts and repair options.
Bottom Blocks & Hook Blocks
Bottom blocks, hook blocks, hooks, sheaves, safety catches, bearings and related lifting-block components.
Limit Switches
Hoist upper and lower limits, rotary limits, travel limits, slowdown limits, ultimate limits and replacement assemblies.
Crane Wheels
Long-travel wheels, cross-travel wheels, trolley wheels, guide rollers and custom replacement crane wheels.
Wheel Blocks
Complete wheel blocks, wheel assemblies, bearings, shafts, geared wheel units and end-carriage travel components.
Motors, Rotors & Stators
Hoist motors, travel motors, rotors, stators and selected repair or service-exchange options.
Pendant Controls
Pendant stations, push buttons, emergency stops, pendant cables, control inserts and replacement control components.
Contactors & Electrical Parts
Contactors, relays, transformers, overloads, circuit breakers, isolators and crane control-panel components.
Variable Speed Drives
VSDs, braking resistors, braking units and suitable drive-control components for hoisting and crane travel applications.
Wireless Remotes
Industrial radio remote transmitters, receivers, complete remote systems and replacement control solutions.
Steel Wire Ropes
Crane and hoist wire ropes selected according to the equipment specification, rope construction, diameter, length and application.
Power Supply Components
DSL and safe-bar components, collectors, festoon parts, flat cables, cable trolleys and crane power-feed components.
Travel Drive Components
Motors, gearboxes, drive wheels, couplings, shafts and associated long-travel and cross-travel components.
Load Limiters & Safety Devices
Load-limiting components, overload devices, anti-collision systems, sensors and application-specific crane safety components.
Bearings, Bushes & Guides
Bearings, bushes, sleeves, guides, rollers, wear components and associated mechanical crane parts.
Engineered Replacement Parts
Shafts, wheels, pins, bushes, couplings, brackets, gears and other components manufactured from drawings, samples or measurements where appropriate.
Part Not Listed?
This is not a complete parts catalogue. If the crane or hoist component you need is not listed above, send us the make, model and part information. We can investigate new, alternative-source, reconditioned, selected pre-used, repair or custom-manufactured options depending on the part and application.
Hoist Stators, Motors & Rewind Support
Service-exchange hoist stators are available for many crane and hoist makes, subject to availability and correct identification. This can provide a practical route to returning suitable equipment to service without waiting for a complete new motor assembly.
Where a suitable exchange unit is not available, repairable motors and stators can be stripped and assessed. Rewinding can then be considered to the required original equipment specification where the necessary technical data is available and the component is suitable for repair.
Custom Manufactured & Engineered Replacement Parts
Some older crane parts cannot be economically sourced from a catalogue. Where technically appropriate, an existing component, drawing, sample or measured part can be reviewed for repair or replacement manufacturing.
Crane Wheels
Replacement wheels and rollers manufactured around the required dimensions and application where suitable.
Shafts & Pins
Input shafts, drive shafts, pins, sleeves, bushes and related machined replacement components.
Couplings & Drive Parts
Coupling hubs, adapters, drive components and selected gearbox-related replacement parts.
Custom Components
Brackets, guards, plates, rollers, bushes and other crane or industrial components where a practical manufactured replacement is possible.
What to Send With Your Spare Parts RFQ
Crane parts are often model-specific. The more information you send with the enquiry, the easier it is to identify the correct component and avoid quoting the wrong part.
Fastest Route for Parts & Product Quotes
Send your crane and hoist spare parts enquiry to our parts sales team. This is the preferred route for spare parts, product pricing, tenders and RFQs that do not initially require a site visit.
If you do not know the part number, that is fine. Send clear photographs and the equipment information and we can investigate from there.
Include as Much of This as Possible
Explore Our Crane Parts & Product Range
If you already know which component group you need, use the links below for more detailed product information.
Crane & Hoist Spare Parts Questions
Can you source obsolete crane parts?
Yes. We can investigate older and difficult-to-source components through local and international supplier networks, selected pre-used parts, repair routes and engineered replacement options.
Do you supply Demag crane and hoist parts?
We can investigate parts for older and current Demag equipment, subject to correct identification, availability and the specific component required.
Do you only supply the brands listed on this page?
No. The listed brands are examples. Send us the make, model and component information for other crane and hoist brands and we can investigate available sourcing or repair options.
Can you supply reconditioned crane parts?
Selected pre-used and reconditioned components may be available where appropriate. Availability, condition and suitability depend on the specific component and application.
Do you offer service-exchange hoist stators?
Service-exchange stators are available for many hoist makes subject to availability and correct identification. Where an exchange unit is unavailable, a repair or rewind assessment may be possible.
What if I do not know the part number?
Send clear photos of the part and equipment nameplate together with the crane or hoist make, model, capacity, voltage and dimensions where possible. We can use this information to investigate the part.
Can you manufacture a part that is no longer available?
In suitable cases, components can be reviewed for reverse engineering or custom manufacture from drawings, samples, measurements or technical information.
Do you supply brake linings and rope guides?
Yes. Brake components, linings, rope guides, couplings, shafts, gearbox components, bottom blocks, limits, wheels, wheel blocks, motors, rotors, stators, pendants and many other crane parts can be investigated.
Before You Replace the Complete Hoist, Let Us Look for the Part
New, obsolete, difficult-to-source, selected pre-used, reconditioned, service-exchange or custom manufactured - if your crane or hoist needs a component, send AC Crane Maintenance the details and let us investigate the available options.
